1999-2004 Ford Mustang Convertible 6 Cyl. SN95 Products

15 Products

Eibach 3510.140 product image

PRO-KIT
1999-2004 Ford Mustang Convertible 6 Cyl. SN95
1.1 in Front | 1.1 in Rear
Part #: 3510.140
Set of 4 Springs
Comment: Tested with factory dampers.
In Stock
$355.00
Eibach 4.1035 product image

SPORTLINE
1999-2004 Ford Mustang Convertible 6 Cyl. SN95
1.7 in Front | 1.5 in Rear
Part #: 4.1035
Set of 4 Springs
Comment: Tested with factory dampers.
In Stock
$355.00
Eibach 3514.840 product image

PRO-DAMPER Kit
1999-2004 Ford Mustang Convertible 6 Cyl. SN95
Part #: 3514.840
Set of 4 Dampers
In Stock
$599.00
Eibach 3518.320 product image

ANTI-ROLL-KIT Front and Rear
1999-2004 Ford Mustang Convertible 6 Cyl. SN95
35mm Front | 25mm Rear
Part #: 3518.320
Front & Rear Sway Bar Kits
Comment: Front Sway Bar is Tubular and Non-Adjustable/ Rear Sway Bar is Solid and Non-Adjustable.
In Stock
$540.00
Eibach 3518.310 product image

ANTI-ROLL-KIT Front
1999-2004 Ford Mustang Convertible 6 Cyl. SN95
35mm Front
Part #: 3518.310
Front Sway Bar Kit Only
Comment: Front Sway Bar is Tubular and Non-Adjustable.
In Stock
$285.00
Eibach 3510.312 product image

ANTI-ROLL-KIT Rear
1999-2004 Ford Mustang Convertible 6 Cyl. SN95
25mm Rear
Part #: 3510.312
Rear Sway Bar Kit Only
Comment: Rear Sway Bar is Solid and Non-Adjustable.
In Stock
$255.00
Eibach 3510.881 product image

PRO-PLUS KIT
1999-2004 Ford Mustang Convertible 6 Cyl. SN95
1.1 in Front | 1.1 in Rear
Part #: 3510.881
Pro-Kit Springs + Front & Rear Sway Bars
In Stock
$895.00
Eibach 4.1035.881 product image

SPORT-PLUS Kit
1999-2004 Ford Mustang Convertible 6 Cyl. SN95
1.7 in Front | 1.5 in Rear
Part #: 4.1035.881
Sportline Springs + Front & Rear Sway Bars
In Stock
$895.00
Eibach 4.1735.680 product image

SPORTLINE System Plus
1999-2004 Ford Mustang Convertible 6 Cyl. SN95
1.7 in Front | 1.5 in Rear
Part #: 4.1735.680
Sportline Springs + Pro-Damper Shocks + Sway Bars
In Stock
$1,171.00
Eibach S90-1-05-038 product image

PRO-SPACER
1999-2004 Ford Mustang Convertible 6 Cyl. SN95
Part #: S90-1-05-038
5mm Pair
Comment: Wheel Bolts and Wheel Studs sold separately. Recommend purchasing wheel bolts or studs with extended length equivalent to the thickness of the wheel spacer. Example, 15mm thick spacer would require a 15mm (0.6") longer wheel stud or wheel bolt. Does not fit GT350
In Stock
$105.00
Eibach S90-4-25-010 product image

PRO-SPACER
1999-2004 Ford Mustang Convertible 6 Cyl. SN95
Part #: S90-4-25-010
25mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
In Stock
$205.00
Eibach S90-4-30-005 product image

PRO-SPACER
1999-2004 Ford Mustang Convertible 6 Cyl. SN95
Part #: S90-4-30-005
30mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
In Stock
$222.00
Eibach S90-4-35-001 product image

PRO-SPACER
1999-2004 Ford Mustang Convertible 6 Cyl. SN95
Part #: S90-4-35-001
35mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
In Stock
$238.00
Eibach S90-4-45-001 product image

PRO-SPACER
1999-2004 Ford Mustang Convertible 6 Cyl. SN95
Part #: S90-4-45-001
45mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
In Stock
$279.00
Eibach R-S90-4-25-010 product image

PRO-SPACER
1999-2004 Ford Mustang Convertible 6 Cyl. SN95
Part #: R-S90-4-25-010
25mm Pair
Comment: Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Factory Refurbished
$153.26 $205.00